How to fix Ethernet connection Windows 10?

As we all know, setting up an Ethernet connection is easier than setting up a wireless connection but on an off-chance, you might face issues while setting up or using an Ethernet connection on your Windows 10 device. In that case, you need to fix windows 10 Ethernet connection issues.

Thus, if you are also someone who is facing any similar issue with your Ethernet connection on Windows 10, then you must fix this issue as fast as possible in order to continue receiving internet connection without any interruptions.

In this article, we shall discuss the correct way to configure or setup the Ethernet connection manually along with some of the ways to fix the issue.

Configure or setup Ethernet Connection Manually on Windows 10

1. Go to the Control Panel > select ‘View by’ to ‘Category’.
2. Select Network and Internet > Network and Sharing Center > Change adapter settings.
3. Click ‘More’ and expand the ‘Details’ menu.
4. Now, double-click the ‘adapter to configure’ to open its properties.
5. The Ethernet here means connectivity to the Internet.
6. While Ethernet 2 means ‘No network access’.
7. Now, double-click on the Ethernet 2 adapter option.
8. Then, navigate to the ‘Networking’ tab.
9. Here, clear Clients for Microsoft Networks and File.
10. And then, clear Printer Sharing for Microsoft Networks.
11. Make the necessary configurations, and click ‘OK’.

Troubleshoot Ethernet problems Windows 10

In case your Ethernet won’t connect to a network, then you must follow the workarounds given below:

Method 1- check for viruses

If there is a virus on your device, then you will surely face issues like these. Run an antivirus on your device, and make sure it is not infected with a virus.

Method 2- reinstall the drivers

In case you have uninstalled any drivers from your device, then you must reinstall them without any further ado. This will ensure that your device is updated with the latest software and configured to comply with the peripherals.

Method 3- enable the connection

1. Click ‘Start’ > ‘Network Connections’.
2. Right-click on it and select ‘Enable’.

Method 4- Check the cable for faults

At times, the Ethernet cable might not be plugged in correctly or the chances are the cable itself is at fault. Therefore, you must plug in carefully and makes sure it is connected properly.

Method 5- Run the Internet connection troubleshooter

1. Go to the Settings > Update & Security > Troubleshooter.
2. Here, find and click on the ‘Internet connection troubleshooter’ to launch it.
3. Make sure that your Ethernet connection is available.
4. In case it is not, restart your computer and test again.

Hopefully, one of the methods will work right for you and let you use enjoy high-speed internet connectivity with the Ethernet cable.

Frequently Asked Questions

1. Why is Windows 10 unable to connect to the Internet?

Your Windows 10 device might not be able to connect to the internet because the Ethernet cable you have connected to it is either loose or you might not have configured the Ethernet connection properly. Besides this, there is a probability that the Internet connection is disabled.

2. How do I enable an Ethernet adapter in Windows 10?

• Open Settings of Windows 10.
• Then, select ‘Network & Security’.
• Click on the ‘Status’ option.
• Select ‘Change adapter options’.
• Right-click the network adapter.
• Select the ‘Enable’ option.

3. Why do I keep losing my internet connection?

The corrupted Windows system files on your device might be the actual cause behind the continuous connecting and disconnecting of your internet connection. In this scenario, you must restore the Windows files or check the Ethernet cable for faults or defects.

4. Why does my Wi-Fi keep dropping in Windows 10?

There might be an issue with the router with which you have connected your device. If you have checked that everything is just fine with the router, then there might be an issue with your network adapter’s power management settings. Try to re-establish the connection to fix the connection.

5. How do I reset my Ethernet Adapter Windows 10?

• Open Settings and go to Network & Internet.
• Then, click on Status followed by “Advanced network settings”.
• Further, select the “Network reset” option.
• Now, select the “Reset now” button.
• On the next window, select “Yes”.

6. Is Ethernet faster than WiFi?

An Ethernet connection is used to provide a direct and wired internet connection to your devices. On the other hand, a wireless connection provides network connectivity via signals. Therefore, if you use a wired connection, it will be comparatively faster because sometimes the signal may seem to drop in the case of Wi-Fi.

7. Why is my Ethernet not working?

Your Ethernet might not be working because it is disabled, knowingly, or unknowingly. Apart from this, there is a possibility that you have not plugged in the cable properly. Try switching the cable and see if it works. If not, change the adapter settings and enable Ethernet from there.